Necast™ Pearly White Series Wireless Touch Switch
Introduction
The Necast™ NS-3L86TWH is a non dimming wall switch, which is unique and elegant designed to replace the traditional 86 and 120 Model switches.
State of the art technology
The Necast™ NS-3L86TWH is combining state of the art lights control technologies with the remote control devices send ON/OFF control commands in seconds.
The Necast™ NS-3L86TWH features an innovative Touch panel for real time collaboration
Easy to Install
The Necast™ NS-3L86TWH is much easy to install.
East to Install, only Live wire connection is required.
Friendly and intuitive user interface
The Necast™ NS-3L86TWH has the more customized panels for DIY users.
Slim Design
Thanks to its slim design, it makes installation easy even in small junction boxes.
Dimension Size and Wiring Diagram
The Necast™ NS-3L86TWH Switch is so easy to install and set up and yet so affordable, you'll want to replace all your switches with Necast™ touch switch. Just remove the old switch, reattach the existing load wire using the included wire nuts, and you're done.
Complete feature set
Overview
- Up to date design and easy-to-install helps save money from bills
- Create elegant whole-house lighting scenes in minutes
- Control lights remotely from anywhere in the house
- A great low-cost investment for any home
- Superior performance and reliability
Specifications
General
- Brand: Necast
- Manufacturer: Necast System Ltd
- Manufacturer Product No.: NS-1L86TWH, Necast Non-Dimming Two-Way Wireless Touch Switch
- Warranty: 2 years
- Certifications: CE
- Standards: EMC –EN5001-1 ：1992 Immunity EN 50082-1 1997
Mechanical features
- Dimensions: 88mm (H) x 88mm (W) x31.5mm (D)
- Weight: 46-100g
- LED Indicator: Blue
- Color: Pearly White, Golden, Black, Brown, Wooden, or Gray
- RF Control: 315MHz/433MHz
- Wire Nuts: Two Included
- Mounting: Mounts in single or multiple-ganged junction box
- Operating Conditions: Indoors, 0 to 80C, up to 95% relative humidity
- Receiving sensitivity: -92dBm
- Reliability: ON/OFF up to 1,000,000 touches
Electrical features
- Supply Voltage: 100-240 Volts AC, 50/60 Hertz, single phase
- Surge Protection: MOV rated for 300 Volts
- Extended range support
- Power Wire Leads: 6", 16 AWG, stranded, 600V, 105C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
- Ground Lead: 6", 18 AWG, stranded, bare copper
- Load Types: Wired-in incandescent lighting and inductive loads
- Neutral Wire: Not Required, Live Wire connection only
- Load Range: 300 Watts; 1000 Watts; 2000 Watts
- Self Consumption: 40uA P<0.0088 Watts
In the box
